Revision Reserve Tarkov: Complete Vehicle Marking Guide
Revision – Reserve is a Peacekeeper quest in Escape from Tarkov requiring players to find and mark seven military vehicles on the Reserve map, including four BMP-2s, two LAV IIIs, and one T-90 tank.
What is Revision – Reserve in Escape from Tarkov?
Revision – Reserve is a mid-wipe task given by Peacekeeper in Escape from Tarkov. This quest is the first in a series that will eventually unlock additional quests like Revision – Lighthouse and Revision – Streets of Tarkov. The primary objective is to locate and mark various military vehicles scattered throughout the Reserve map.
Quest Requirements
Before starting this quest, you need to meet certain requirements:
- Be at least level 14 to unlock the quest
- Have 5 MS2000 Markers (purchasable from Prapor level 1 for about 15,000 rubles each or from Ragman level 1 for approximately €105 each)
- Obtain the RB-ST key (needed to access one of the BMP-2 locations)
The RB-ST key can be found in various locations:
- In scav pockets and bags
- Inside jackets or drawers
- Purchased from the flea market (typically costs between 60,000-100,000 rubles)
- Received as a reward for completing Peacekeeper’s “Spa Tour – Part 7” quest
This quest is required for obtaining the Kappa secure container, making it essential for players aiming to complete all quests in the game.
Quest Objectives in Detail
The Revision – Reserve quest involves finding and marking several military vehicles. Here’s a breakdown of all objectives:
- Find and inspect the first BMP-2 on Reserve
- Mark the first BMP-2 using an MS2000 Marker
- Find and inspect the second BMP-2 on Reserve
- Mark the second BMP-2 using an MS2000 Marker
- Find and inspect the third BMP-2 on Reserve
- Mark the third BMP-2 using an MS2000 Marker
- Find and inspect the fourth BMP-2 on Reserve
- Mark the fourth BMP-2 using an MS2000 Marker
- Find and inspect the first LAV III on Reserve
- Mark the first LAV III using an MS2000 Marker
- Find and inspect the second LAV III on Reserve
- Find and inspect the T-90 tank on Reserve
It’s important to note that initially, only the objectives to locate the vehicles will appear in your task list. After finding five of the seven vehicles, the game will update your objectives to include marking them with the MS2000 Markers. To complete the quest efficiently in a single raid, bring all five markers with you from the start.
Vehicle Locations on Reserve
Finding all the military vehicles can be challenging, especially with the threat of other players and the Reserve boss, Glukhar, who often spawns near several of these locations. Here’s a detailed guide to finding each vehicle:
First BMP-2 Location
The first BMP-2 is located near the Heating Pipes scav extraction point. From this extraction point:
- Head east
- Look for the BMP-2 sitting in a ditch
- Mark it with an MS2000 Marker
This location is relatively accessible but can be dangerous due to its proximity to a popular extraction point.
Second BMP-2 Location
The second BMP-2 can be found in the White Knight building:
- Look for the building with the White Knight logo painted on it
- The vehicle is inside the garage
- This location is directly opposite the K buildings (the broken train station where Glukhar can spawn)
- Mark it with an MS2000 Marker
Be cautious when approaching this area as it’s a high-traffic zone with potential for PMC and scav encounters.
Third BMP-2 Location
The third BMP-2 requires the RB-ST key to access:
- Find the RB-ST room on the map
- Use your key to unlock the door
- Once inside, the BMP-2 will be visible on your left
- Mark it with an MS2000 Marker
This is perhaps the most secure location to mark, as the locked door provides some protection while you complete the objective.
Fourth BMP-2 Location
The fourth BMP-2 is located near the Sewer Manhole extraction point:
- Go to the other side of the Sewer Manhole extract
- Head toward the Checkpoint Fence (a scav extraction point)
- Cross the fence
- Look for the BMP-2 in a ditch
- Mark it with an MS2000 Marker
This area is somewhat exposed, so be vigilant for snipers and other players.
First LAV III Location
The first LAV III is positioned on top of the Bunker Hermetic Door extraction:
- Go to the Bunker Hermetic Door extract
- Look on top of the bunker
- The LAV III might be difficult to spot due to surrounding bushes
- Mark it with an MS2000 Marker
This location can be particularly dangerous as it’s near a high-traffic area and offers limited cover.
Second LAV III Location
To find the second LAV III:
- Start at the Scav Lands extraction point
- Head toward the Black Bishop building
- Look for the LAV III near a train track on your way to the building
Unlike the other vehicles, this one only needs to be inspected, not marked.
T-90 Tank Location
The T-90 tank is relatively easy to find:
- Start at the Co-Op extract (Scav Lands)
- Go east
- The T-90 tank will be visible
- Approach it to complete the objective
Similar to the second LAV III, this vehicle only needs to be inspected, not marked.
Tips for Completing Revision – Reserve
Completing this quest efficiently requires some planning and awareness. Here are some helpful tips:
Preparation Before the Raid
- Bring all five MS2000 Markers with you (even though initially the quest only shows the “find” objectives)
- Make sure you have the RB-ST key
- Consider bringing a map or having a reference image of Reserve with the vehicle locations marked
- Bring adequate gear as Reserve can be a challenging map with both PMC and scav threats
- Consider doing this quest during off-peak hours or in a night raid for reduced player encounters
In-Raid Strategy
- Plan an efficient route to visit all locations while minimizing exposure
- Be aware that Glukhar (the Reserve boss) and his guards often spawn near several of these vehicle locations
- The third BMP-2 in the RB-ST room is perhaps the safest to mark, as you can lock yourself in
- Consider marking the vehicles in less trafficked areas first
- Use sound cues to determine if other players are nearby before exposing yourself to mark a vehicle
- The marking process takes a few seconds, during which you’re vulnerable, so clear the area first
Potential Challenges
- The Reserve map has many sniping positions, making you vulnerable while marking vehicles
- Some vehicles are in high-traffic areas where player encounters are likely
- The quest requires visiting multiple spread-out locations, increasing the risk of encounters
- Some players have reported bugs with this quest, particularly with the second BMP-2 not registering as found
Quest Rewards
Upon completing the Revision – Reserve quest, you’ll receive:
- 7,300 Experience points
- +0.03 Peacekeeper reputation
- 800 Dollars (840 with Intelligence Center Level 1, 920 with Intelligence Center Level 2)
- 15× 5.56x45mm Warmageddon ammo packs (20 rounds each)
Additionally, completing this quest unlocks several other quests:
- Classified Technologies
- Revision – Lighthouse
- Revision – Streets of Tarkov
Troubleshooting Common Issues
Some players have reported issues with the Revision – Reserve quest. Here are some common problems and potential solutions:
Quest Not Registering Vehicle Inspections
If you’re having trouble with the game not registering when you’ve found a vehicle:
- Make sure you’re approaching the correct vehicle
- Get close enough to the vehicle to trigger the inspection
- Try looking at different parts of the vehicle
- Restart your game and try again
- Verify your game files through the launcher
“Can’t Complete Quest” Error
Some players have reported receiving a “707 Can’t complete quest” error when trying to turn in the quest. If you encounter this:
- Make sure you’ve completed all objectives, including both finding and marking the required vehicles
- Try restarting your game
- Report the bug through the official Escape from Tarkov launcher
Markers Not Working
If you’re having issues with the MS2000 Markers:
- Ensure you have the markers in your inventory
- Make sure you’re at the correct vehicle
- Try approaching the vehicle from different angles
- The marking action takes a few seconds to complete, so make sure you’re not interrupted
Importance of Revision – Reserve in Progression
The Revision – Reserve quest plays a significant role in your overall Escape from Tarkov progression:
Kappa Container Requirement
This quest is required for obtaining the Kappa secure container, which is the ultimate secure container in the game. The Kappa container offers more storage space than the standard containers, making it highly desirable for serious players.
Quest Chain Progression
Completing Revision – Reserve unlocks several other quests, including:
- Classified Technologies
- Revision – Lighthouse
- Revision – Streets of Tarkov
These follow-up quests continue the storyline and offer their own rewards and progression opportunities.
Peacekeeper Reputation
The +0.03 reputation gain with Peacekeeper helps you progress toward unlocking higher loyalty levels with this trader, giving you access to better items, weapons, and ammunition.
Reserve Map Overview for Quest Completion
Understanding the Reserve map layout is crucial for efficiently completing the Revision – Reserve quest. Here’s an overview of key areas relevant to the quest:
Key Landmarks
- Heating Pipes: Near the first BMP-2, also a scav extraction point
- White Knight Building: Contains the second BMP-2 in its garage
- RB-ST Room: Houses the third BMP-2, requires a key
- Sewer Manhole: Near the fourth BMP-2, also an extraction point
- Bunker Hermetic Door: The first LAV III is on top of this bunker, also an extraction point
- Black Bishop Building: The second LAV III is on the way to this building from Scav Lands
- Scav Lands: Near the T-90 tank, also a co-op extraction point
High-Risk Areas
- The area around White Knight is often patrolled by Glukhar and his guards
- The open areas near extraction points tend to have more player traffic
- The rooftops surrounding the central buildings are popular sniper positions
Extraction Options
When planning your route, consider which extraction points you’ll use:
- PMC extractions include Cliff Descent, Bunker Hermetic Door, and Armored Train
- Scav extractions include Heating Pipes, Checkpoint Fence, and Scav Lands
- The Sewer Manhole extract only works if you don’t have a backpack
Frequently Asked Questions
Do I need to mark all seven vehicles?
No, you only need to mark five of the seven vehicles. Specifically, you need to mark the four BMP-2s and the first LAV III. The second LAV III and the T-90 tank only need to be inspected, not marked.
Where can I get the RB-ST key?
The RB-ST key can be found in scav pockets and bags, inside jackets or drawers, purchased from the flea market, or received as a reward for completing Peacekeeper’s “Spa Tour – Part 7” quest.
Can I complete this quest in one raid?
Yes, it’s possible to complete this quest in a single raid if you bring all five MS2000 Markers with you and know the locations of all seven vehicles. However, due to the spread-out nature of the locations and the potential for player encounters, it might be safer to complete it over multiple raids.
Is this quest required for Kappa container?
Yes, Revision – Reserve is required for obtaining the Kappa secure container.
What level do I need to be to start this quest?
You need to be at least level 14 to unlock the Revision – Reserve quest from Peacekeeper.
What happens if I die after marking some vehicles?
The progress for vehicles you’ve already found and marked will be saved. You’ll only need to find and mark the remaining vehicles in subsequent raids.
Is there a specific order I should follow for finding the vehicles?
There’s no required order, but planning an efficient route can help minimize exposure and risk. Consider starting with the vehicles in less trafficked areas and ending with those in high-risk zones.
Samantha Yates is a creative writer and journalist with expertise in content creation and editing. She holds an MA in Creative Writing and brings professional experience from Lionbridge, where she developed engaging content for leading technology companies
